223 ULTRA 7 SUPPRESSOR

Lightweight Precision Rifle Suppressor, 7 inch. 
Made specifically for .223 centerfire calibers

The ULTRA 7 is our highly efficient compact precision rifle suppressor. It is best for applications where a compact form factor is important but excellent suppression is still required. The 6.5 mm caliber version optimizes suppression performance on 6.5 mm and smaller calibers.

The 223 ULTRA 7 will suppress a typical .223 Rem bolt-action rifle down to approx 129-131 dB1. It also has very little or no "first round pop" (FRP) in most applications. The ULTRA 7 weighs just 9.7 ounces.

ULTRA SERIES

The ULTRA series represents a revolutionary improvement in titanium precision rifle suppressors. We took everything we've learned over the last half decade building the best precision rifle suppressors in the world and put it into the ULTRA design. The ULTRA series offers unprecedented light weight and class-leading suppression levels.

Compared to the prior 223P-2/CB series, the 223 ULTRA series is 25-30% lighter, 2-3 dB quieter, and much stronger. The ULTRA series holds the same precision and repeatability as the 223P-2/30CB series.

The .223 caliber ULTRA series is available in the 7-inch version. They are available in either our Compact Brake (CB) Mount (a "thread over muzzle brake" type mount) or in a direct thread mount.

The CB mount and direct thread mount have equivalent accuracy and repeatability.

With the CB mount, the suppressor mates to a conical shoulder on the brake and locks up rock solid and extremely tight. In direct thread configuration, the ULTRA suppressors use a heat-treated 17-4 thread insert and initial blast shield. The ULTRA series suppressors also have the flexibility to be changed from direct thread to CB mount and vice versa via a simple factory service operation, in case your needs change. This is accomplished by removing or replacing the default brake from the direct thread version.

The ULTRA series is constructed of titanium with a fully-welded core. This material and construction provide a great strength to weight ratio. It can take whatever your precision rifle can dish out.

The ULTRA baffle stack was completely redesigned, but retains the principles that made the 30P-1 stack such a great precision and long-range suppressor. Thunder Beast Arms Corp suppressors have racked up impressive results at long-range field shooting events nationwide, and have been the most popular suppressor used in the Precision Rifle Series (top 50 competitors) for three years running.

Many long-range shooters prefer shooting suppressed because the muzzle blast and concussion is eliminated, while the recoil impulse is reduced and smoothed out over time. The net result is that the rifle is easier to shoot and it's easier to make hits. Communication with your spotter is easier because the need for hearing protection is reduced.

The 223 ULTRA was designed around .223 Rem for maximum flexibility and is rated up to .223 WSSM (18" barrel).

SPECIAL FEATURES

Direct thread attachment option

CB series muzzle brake and flash hider attachment option

Ionbond DLC coating on CB muzzle devices

Conical shoulder surface on CB mount

100% titanium construction

360-degree fully-welded baffle core

Helical Baffle Technology

Magnum rated

Rock-Solid POI Repeatability

APPLICATION NOTES

Minimum barrel lengths2: 

11.5"223 Rem, 5.56

18.5".223 WSSM

Please contact tech support for: 
   .22 cal loads exceeding 50 powder grains,
For questions about a particular rifle/load combination please contact Thunder Beast Arms. 
* SBR use in these calibers, CB brake mount or Direct Thread recommended.

Please note that thermal input will be higher with shorter barrels. Ultra series suppressors should be kept under 800 degrees F.

Specifications

Calibers.223 caliber, up to 5.56 mm / .224" caliber

MaterialTitanium

Length7 inches

Diameter1.5 inches

MountsCB series brake or flash hider, and
Direct Thread

Weight9.7 ounces (CB mount) 
11.5 ounces (direct thread)

Threads (Brake or Direct Thread)1/2-28

FinishBlack CeraKote; OD Green or FDE available

Brake MaterialHeat-treated 17-4 stainless

Brake FinishIonbond DLC

UsePrecision/Long-range rifle, bolt or semi-auto

Price$945 Direct Thread
$995 CB Mount (one brake included). 
Extra brakes $125/ea
"CB" External thread protector, $35
  (not included - sold separately)